About Product
Doors That Stay Square In Hard-use Openings
HMPS stands for hollow metal pressed steel, a durable door construction used for industrial, commercial, and service areas where strength, dimensional stability, and frequent operation are important. The door skins are cold-pressed from CR steel sheet into a profiled panel, assembled around an internal steel framework, and filled with an insulating core. This pressed construction provides a flatter surface and consistent dimensions, helping the door leaf remain properly aligned during installation and regular use.
As an HMPS Door Manufacturer in India, Aurotoshi manufactures hollow metal pressed steel doors for applications where a robust and long-lasting door set is required. These doors are suitable for plant and electrical rooms, corridors, risers, service areas, warehouse offices, back-of-house areas, and other industrial or commercial openings that require frequent everyday operation.
Aurotoshi HMPS doors are available in single-leaf and double-leaf configurations with a common rebated pressed steel frame. Single-leaf doors are suitable for standard-width openings, while double-leaf doors provide a wider clear opening for main exits and routes used by trolleys, pallets, equipment, and other material-handling traffic.
For openings where fire resistance is required, Aurotoshi also offers fire-rated HMPS door configurations with certified 1-hour and 2-hour fire ratings tested to IS 3614 Part 2 and BS 476 Part 22. This allows the door specification to be selected according to the application's durability, opening size, traffic, and fire-safety requirements.
Features
Hardware-Reinforced Shutter
46 mm double-skin shell from two galvanised steel sheets, lock-seam jointed at the stile edges, with proprietary insulation infill and additional reinforcement at every hinge, lock and closer position.
Pressed & Rebated Steel Frame
The frame is pressed from sheet steel with a rebated profile that seats the leaf square and takes the closing impact on the frame rather than on the latch, so alignment holds through repeated slamming instead of drifting out.
Dimensionally Stable Through Monsoon & Summer
A welded galvanised steel leaf holds its dimension through humidity swings, so the gap around the leaf stays constant and the door keeps latching and seating against its closer.
Corrosion-Resistant Finish
Shutter and frame carry a corrosion-resistant coated finish specified for Indian site conditions, including wash-down areas and plant corridors where a painted timber door blisters and untreated steel rusts out at the edges first.
Branded and Globally Trusted Hardware
Hinges, closers and locksets are specified from branded ranges rather than unbranded fittings, because hardware, not the leaf, is what fails first on a door cycling hundreds of times a day — and branded parts can be replaced from stock without changing the door.
Fire-Rated Upgrade Path
The same opening takes a 1 hr or 2 hr rated set — 100 × 50 mm single rebate frame in 18 gauge, or 143 × 57 mm double rebate in 16 gauge — tested to IS 3614 Part 2 and BS 476 Part 22.
HMPS doors are widely used in industrial and commercial buildings where a strong, durable, and low-maintenance door is required for regular daily operation. HMPS Doors India solutions are suitable for plant rooms, electrical rooms, service areas, corridors, warehouse offices, risers, utility areas, and other locations where the door needs to withstand frequent opening and closing.
As an HMPS Door Manufacturer in India, Aurotoshi manufactures hollow metal pressed steel door sets using galvanised steel construction, pressed steel frames, internal reinforcement, and insulated infill. The doors are available in single-leaf and double-leaf configurations to suit different opening widths and movement requirements.
Hollow Metal Pressed Steel Doors provide a robust solution for demanding industrial and commercial environments. Their pressed-steel construction provides a consistent profile and helps maintain dimensional stability during regular use.
Aurotoshi HMPS doors are suitable for manufacturing facilities, warehouses, electrical and utility rooms, service corridors, commercial buildings, and back-of-house areas. Single-leaf configurations can be used for standard doorways, while double-leaf doors are suitable for wider openings used by trolleys, pallets, equipment, and other material-handling traffic.
Where an opening requires fire resistance, Aurotoshi also provides 1-hour and 2-hour fire-rated HMPS door configurations tested to IS 3614 Part 2 and BS 476 Part 22.
When selecting Hollow Metal Pressed Steel Doors Manufacturers in India, factors such as shutter construction, frame profile, reinforcement, hardware, opening dimensions, operating frequency, and required fire rating should be considered according to the application.
Aurotoshi manufactures HMPS door sets with galvanised steel frames and branded hardware options. The doors can be supplied according to project-specific opening dimensions and door schedules, making them suitable for industrial projects, commercial buildings, infrastructure facilities, and other applications where dependable door performance is required.
For facilities that require certified fire-rated access, the HMPS range can be specified with suitable fire-rated construction. For other industrial openings, Aurotoshi also provides Industrial Rolling Shutter solutions and Sectional Door solutions, depending on the opening size, traffic pattern, and site requirements.
The appropriate HMPS door configuration depends on the opening size, pedestrian or material movement, operating frequency, available space, and whether fire resistance is required. A single-leaf door is generally suitable for standard-width pedestrian openings, while a double-leaf configuration provides greater clear width for equipment and material movement.
Aurotoshi can configure the HMPS door set according to the project's opening dimensions, hardware requirements, and applicable fire-rating requirements, helping ensure the selected door is suited to the actual site conditions.
Models & Specifications
Choose Your Specification
Choose from our range of high performance variants tailored to your specific facility requirements.
One hinged pressed-steel leaf in a rebated steel frame, for openings a single person passes through. The default choice for corridors, offices, electrical and plant rooms, risers and service areas, where the opening is standard width and the door is opened by hand many times a day.
Two hinged pressed-steel leaves in a common rebated frame, usually an active leaf with a semi-fixed secondary leaf. Specified where the opening is too wide for one leaf, where trolleys, pallets or equipment have to pass, or where an exit route needs full opening width under load.
One hinged pressed-steel leaf in a rebated steel frame, for openings a single person passes through. The default choice for corridors, offices, electrical and plant rooms, risers and service areas, where the opening is standard width and the door is opened by hand many times a day.
Two hinged pressed-steel leaves in a common rebated frame, usually an active leaf with a semi-fixed secondary leaf. Specified where the opening is too wide for one leaf, where trolleys, pallets or equipment have to pass, or where an exit route needs full opening width under load.
Full Specification Comparison
| Specification | Single Leaf HMPS Door | Double Leaf HMPS Door |
|---|---|---|
| Best for | Standard-width openings where people pass one at a time — corridors, offices, plant and electrical rooms, risers, service areas | Wide openings where trolleys, pallets or equipment must pass, and main exit routes that need full opening width |
| Leaf configuration | Single leaf, single swing | Double leaf - active leaf with semi-fixed secondary leaf |
| Typical opening width | 1200 × 2100 mm typical; other sizes to door schedule | Wider openings - width confirmed against the door schedule |
| Traffic type | Frequent pedestrian, hand-opened | Pedestrian plus trolley, pallet and equipment movement |
| Fire-rated version | 1 hr and 2 hr rated versions, tested to IS 3614 Part 2 and BS 476 Part 22 | 1 hr and 2 hr rated versions, tested to IS 3614 Part 2 and BS 476 Part 22 |
Where These Doors Are Installed
Industries & Applications
Engineered for diverse industrial and commercial environments, our solutions are trusted across a wide range of industries and applications.
Frequently Asked Questions
Buyer's Questions, Answered
Common queries from facility managers, procurement heads, and plant engineers.
Yes. Aurotoshi provides OEM and ODM manufacturing support for project requirements and can work with EPC contractors, consultants, system integrators, and project developers. Project-specific specifications, drawings, hardware requirements, and compliance documentation can be provided according to the application.
HMPS stands for Hollow Metal Pressed Steel. HMPS doors are manufactured using pressed steel sheets for the shutter and frame, with internal reinforcement at key hardware locations. The pressed construction provides a consistent profile and dimensional stability, making HMPS doors suitable for industrial and commercial areas with frequent daily use.
HMPS doors are commonly used in plant rooms, electrical rooms, service areas, corridors, risers, warehouse offices, utility areas, and back-of-house spaces. They are suitable for applications where a durable, low-maintenance steel door is required for regular pedestrian or service access.
A single-leaf HMPS door is suitable for standard-width openings used mainly for pedestrian access, such as corridors, offices, plant rooms, and electrical rooms. A double-leaf HMPS door provides a wider opening for main exits and routes used by trolleys, pallets, equipment, or other material-handling traffic.
Yes. Aurotoshi offers 1-hour and 2-hour fire-rated HMPS door configurations for openings where fire resistance is required. These configurations are tested to IS 3614 Part 2 and BS 476 Part 22. The required fire rating should be specified according to the building and project requirements.
Hollow metal pressed steel doors provide a combination of strength, dimensional stability, durability, and low maintenance. The steel construction is suitable for high-use industrial and commercial areas where conventional timber or lightweight doors may not provide the required long-term performance.
Yes. HMPS doors can be specified for a wide range of industrial, commercial, infrastructure, and service applications. Typical locations include manufacturing facilities, warehouses, electrical rooms, utility areas, offices, corridors, service routes, and other high-use openings.
Yes. Vision panels can be provided as an option, depending on the door application and project requirements. Hinges, door closers, locks, and other hardware can be specified from branded ranges according to the required door schedule, traffic conditions, and application.
Aurotoshi HMPS doors use galvanised steel construction and a corrosion-resistant finish designed for Indian site conditions. The appropriate finish should be selected according to the environment, particularly for wash-down areas, coastal locations, or facilities exposed to chemicals or high humidity.
Routine maintenance generally includes hinge and closer inspection, lockset checks, frame and anchor inspection, hardware lubrication where applicable, and closer adjustment. Regular inspection helps maintain proper alignment, smooth operation, and reliable latching. Aurotoshi also offers AMC support for installed systems.
After Installation
Service & AMC for
HMPS Doors
We don't disappear after installation. Structured AMC, 24-hour breakdown response, in-house spare parts dispatched from Ghaziabad.
- Hinge and closer servicing
- Lockset and latch alignment check
- Frame, anchor and rebate inspection
- Finish and edge corrosion check
- Service records provided
- 24-hour response for AMC customers
- In-house spare parts, no import lead times
- Closer, hinge and panic bar replacements
- Trained engineers across Delhi NCR, Mumbai, Pune
- Door schedule and opening register
- Hardware replacement history
- Leaf alignment and closing verification
- Fire-rating test certificates on file